PROTEC VCI INTERNATIONAL LIMITED

PROTEC VCI OIL

Protec VCI MM-40 is a rust preventive oil with built-in VCI
inhibitors. In a closed system it therefore sets free the protective
VCI-vapours over a long period of time. It is the ideal rust
preventive for fuel tanks, gear boxes, storage tanks and similar
containers. Typical applications are also the protection of
outboard-motors during the winter season.
VCI-oil burns without forming ashes and is miscible with gasoline,
oil and Diesel. Therefore it is not necessary to take out the
Protec VCI MM-40 when starting an engine etc. It protects iron,
steel, copper, brass, bronze and other metals.

IMPORTANT NOTICE!
For each m³ of void space to be protected about 0,3 - 0,4 l of
Protec VCI MM-40 oil are needed!

Standard grade:
Protec VCI MM-40 has a standard viscosity of about 100 - 120
cSt at 25 degr. C, however it can be adjusted to the customer’s
needs.
Protec VCI MM-40 L.V. has a viscosity of about 20 cSt at 25
degr. C.
PROTEC VCI MM-40 S-5

Protec VCI MM-40 S-5 is a rust preventive oil with unique
properties. It combines the protective properties of a classical
film-forming oil with those of a straight VCI oil. It can be used for
the (intermediate) protection of iron, steel, copper, brass, zinc
and bronze.
In a closed system it therefore sets free the protective VCI-
vapors over a long period of time. It is the ideal rust preventive
for fuel tanks, gear boxes and similar “closed systems” without
the need of direct contact with the metal surface. For each m³ of
void space to be protected 0,3 - 0,4 l of  Protec VCI MM-40 S-5is
needed.

Standard grade:
Protec VCI MM-40 S-5 has a standard viscosity of about 100 -
120 cSt at 25 degr. C.
Protec  VCI MM-40 S-5 LV has a viscosity of about 20 cSt at 25
degr. C.